Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2023-10-23 21:10
408
Company Profile
Opos (Xiamen) Electronic Technology Co., LtdBy certification [File Integrity]
Contact:xmjiexin(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Website:http://www.oposprinter.com/ http://xmjiexin.cnzhongqi.com/
IP1 Series thermal printers
The IP1 printer is widely recognized for its exceptional features, including its remarkable durability, unwavering dependability, and impressive printing quality. Its primary usage can be typically observed in electronic cash registers (ECRs) and fiscal cash registers. To reiterate, this printer model continues to maintain its standing due to its extended lifespan, high level of reliability, and ability to produce prints with superior resolution.
IP1 Features
â—†Bidirectional printing
â—†High speed
â—†High reliability
â—†Black mark director
â—†Paper width:58mm and 76mm
â—†multipe copy
Specifications
ITEM: IP1
Printing method: Impact dot matrix
:4.4(42)。,。
5.6 lines/s (30 English characters per line)
8.9 lines/s (15 English characters per line)
The speed at which paper is fed into the printer is 13.9 mm/s or 33 lines/s, considering the height of each line to be 4.23 mm.
Dot pitch(mm): 0.355
Printing dots: 210 totally, can print 420 places
Paper width: 58 or 76
Printer moving resolution (mm): 0.3024
Paper feed resolution (mm): 0.176
Dimension (mm): 127x98.2x53
Weight (g): 470
Head temperature detection: thermistor
Paper detection: Photo-sensor
In place detection: Photo-sensor
Black mark detection: Photo-sensor
Color bar: ERC-39
Connecting lines: 1.25 mm 27PIN FCC or FPC
Totally width:35 mm, thickness:0.3 mm
Mechanism life: 9 million lines
Printer head life: 3 hundred million dots/ needle
Operation voltage range(V): 24V±10%
Logical voltage(V): 5.0±5%
Operating temperature(°C): 0ï¼50
Operating humidity(RH): 10ï¼…ï¼90ï¼…
Storage temperature(°C): 5ï¼35
Storage humidity(RH): 40ï¼…ï¼70ï¼…
Thermal Print head configuration
Dots of line: 9 needles, vertical distribution
Needle circle resistance: 18.7±10%Ω
Dot pitch: 0.355 mm
Operation voltage range(V): 24V±10%
Logical voltage(V): 5V±5%
Printer head life: 3 hundred million dots/needle
1.1Â Â Energy consumptionDrive condition |
specification |
|
1 |
Standard conditions: e24V,room temperature |
6.9mJ/dot Drive width 346µs |
2 |
Max. energy consumption 26.4V, 0℃ |
16.1mJ/dot Drive width 322µs |
3 |
Performance calculation |
Input energyJ* printing dot/ dirve time (s) |
4 |
The average energy consumption to print the  following K character |
33.4W e×18dot/(0.413ms×9) |
5 |
Peak current |
11.7A(standard  condition) 15.3A(max) |
Note: drive voltage will be not higher than 21.6V.
Item |
code |
condition |
number |
unit |
|||
input |
Forward voltage |
VF |
IF=10mA |
- |
1.2 |
1.6 |
V |
Reverse forward voltage |
IR |
VR=5V |
10 |
µA |
|||
wavelength |
λP |
IF=10mA |
940 |
Nm |
|||
output |
Collector to emission voltage |
BVCEO |
IC=0.5mA |
30 |
V |
||
Emission to collector voltage |
BVECO |
IE=0.1mA |
5 |
V |
|||
Collector dark current |
ICEO |
Ee=0mW/cm2 VCE=20V |
1 |
µA |
|||
Collector light current |
IL |
VCE=5V IF=10mA RL=1K |
1.5 |
2 |
mA |
||
Saturation voltage drop |
VCE(SAT) |
IF=10mA IC=0.1mA |
0.4 |
V |
|||
Coupling character |
Rise time |
tr |
VCE=5V IC=2mA |
5 |
µs |
||
Fall time |
tf |
5 |
µs |
Step number |
||||
place |
1 |
2 |
3 |
4 |
A |
- |
- |
+ |
+ |
B |
+ |
- |
- |
+ |
/A |
+ |
+ |
- |
- |
/B |
- |
+ |
+ |
- |
Â
If you use half step, there are 8 places (from right to left).
Step number |
||||||||
place |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
A |
- |
- |
- |
+ |
+ |
+ |
||
B |
+ |
- |
- |
- |
+ |
+ |
||
/A |
+ |
+ |
+ |
- |
- |
- |
||
/B |
- |
+ |
+ |
+ |
- |
- |
Power on A and B coils, use 66% current drive to reduce heating when half step drive.
You are advised to use 100% current drive during speeding up to increase power.
1.1  stepper motor drive 1, Use PWM way to advoid motor over heating. you can choose chips: L6219,L2916,L3967 or others; 2, motor should move 24 steps at least to avoid the color bar destroy when printing as the color bar is also drive by printer head. 3, the motor drive should be finished according to HOME place detection. When it is in HOME, the step motor allowed to move 27 steps toward the right, 228 steps toward to left. 4, the motor drive should be slow stared and stopped.All slow start chart:
step |
time(μs) |
step |
time(μs) |
1 |
4883 |
2 |
1941 |
3 |
1469 |
4 |
1232 |
5 |
1087 |
6 |
987 |
7 |
915 |
8 |
860 |
9 |
826 |
10 |
826 |
Half slow start chart:
Step |
Half step time(μs) |
step |
Half step time (μs) |
1 |
2453 |
2 |
1565 |
3 |
1236 |
4 |
1048 |
5 |
924 |
6 |
833 |
7 |
764 |
8 |
709 |
9 |
664 |
10 |
627 |
11 |
595 |
12 |
567 |
13 |
543 |
14 |
522 |
15 |
503 |
16 |
486 |
17 |
471 |
18 |
457 |
19 |
445 |
20 |
433 |
21 |
423 |
22 |
413 |
23 |
413 |
24 |
413 |
25 |
413 |
26 |
413 |
All slow stop chart:
Step |
Half step time(μs) |
step |
Half step time (μs) |
1 |
826 |
2 |
826 |
3 |
835 |
4 |
908 |
5 |
992 |
6 |
1092 |
7 |
1211 |
8 |
1359 |
9 |
1560 |
10 |
1873 |
11 |
2527 |
12 |
5999 |
13 |
9400 |
Half slow stop chart:
Step |
Half step time(μs) |
step |
Half step time (μs) |
1 |
413 |
2 |
413 |
3 |
413 |
4 |
421 |
5 |
435 |
6 |
450 |
7 |
466 |
8 |
483 |
9 |
502 |
10 |
524 |
11 |
547 |
12 |
574 |
13 |
604 |
14 |
639 |
15 |
681 |
16 |
731 |
17 |
794 |
18 |
876 |
19 |
991 |
20 |
1167 |
21 |
1490 |
22 |
2377 |
23 |
3490 |
24 |
5600 |
http://www.opos-printers.com/