Negotiable
The date of payment from buyers deliver within days
Shanghai
Long-term effective
2023-05-23 21:19
377
Company Profile
By certification [File Integrity]
Contact：steelbond(Mr.)
Email：
Phone：
Area：Shanghai
Address：Shanghai
Website：http://www.steelbondsg.com/ http://steelbond.cnzhongqi.com/
Monel 400 Plate
Monel is a common name for a group of nickel alloys that contain nickel the most with copper and other elements. The alloy is called cupronickel when the copper content exceeds nickel content. Usually, Monel contains from 52 to 67% of nickel. Monel properties and the composition make it stronger than pure nickel material. The formation could be by hot rolling or cold drawing. The cold drawn products precise in their dimensions and the hot rolled ones are much stronger. The alloy is very resistant especially to rapid flow of sea water. This property makes it best suited for sea water and marine applications. It is easy to be welded, machined and cold worked upon this material.
MONEL® nickel-copper alloy 400 (UNS N04400/ W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters.
 |
 |
 |
Specification |
ASTM B127, SAE AMS 4544 |
Standard |
ASME, ASTM, AISI, AMS, JIS, EN, DIN, GB/T |
Grade |
UNS N04400, 2.4360, alloy 400, Monel 400 |
Thickness of Plate |
4.76MM-70MM and width >250mm |
Thickness of sheet |
Thickness <4.76MM and width >600mm |
Thickness of Strip |
Thickness <4.76MM and width <600mm |
Finish for sheet |
No.1 finish-hot roolled, annealed and descaled |
No.2D finish-cold-rolled, dull finish | |
No.2B finish-cold-rolled, bright finish | |
No.3 finish-intermediate polished finish, one or both sides | |
No.4 finish-general purpose polished finish, one or both sides | |
No.6 finish-dull satin finish, tampico brushed, one or both sides | |
No.7 finish-high luster finish | |
No.8 finish-mirror finish | |
Finish for strip |
No.1 finish-cold rolled to specified thick-ness, annealed, and descaled |
No.2 finish-same as No.1 finish, followed by a final light cold-roll pass, general on highly polished rolls | |
Bright annealed finish-a bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace | |
Polished finish-strip is also available in polished finishes such as No.3 and No.4 | |
Finish for plate |
Hot-rolled or cold rolled, and annealed or heat treated, and blast cleaned or pickled |
Hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground | |
Hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground, and pickled | |
Edges for cold rolled strip |
No.1 edge-a rolled edge, either round or square as specified. |
No.3 edge-an edge produced by slitting | |
No.5 edge-an approximately square edge produced by rolling or filing after slitting | |
Delivery condition |
Annealed, hot rolled, cold rolled, pickled, hard |
Product type |
Plate, sheet, coil, strip, foil, ribbon, wire |
Origin of raw materials |
CHINA, USA, EUROPE, JAPAN |
Brand we mainly distributed |
BAO STEEL, He-cheng nickel |
Value added services available |
Cut-to-length |
Laser cutting | |
Third party witness and test arrangement | |
Edge preparation | |
Color coding | |
Package |
Wooden Boxes |
Wooden pallets | |
Steel Strips Bundled | |
Standard seaworthy export packing | |
As required |
http://www.steelbondsg.com/
